CALCIUM SILICATE, PERLITE PROCESSED TO MOLDED ELBOW AND TEE


  ASKE creates full sets of calcium silicate and perlite elbows and tees。 Based on the original product and without changing technical parameter and property, ASKE processes into elbow and cross valve shapes which are more convenient and fast for use, increasing the engineering installation efficiency at the maximum for customers and greatly reducing the construction time, labor cost and can also customize specially according to the requirements of customers。

· Specifications Table

Normal Size:EL:R=D EL-LR=1。5D


 Name
 Thickness
(mm)
25 40 50 65 75
Right angle bend
(halve)
 ID
(mm)
φ34、φ42、φ49、φ61、φ76、φ89
Shrimp bend
(halve)
φ76、φ89、φ102、φ114、
Shrimp bend
(quartering)
φ141、φ168、φ194、φ219、φ245、φ273、φ303、φ325、φ356
Shrimp bend
(Large size)
φ409、φ458、φ508、φ559

· Maximum thickness of the elbow produced


 Name
 Thickness
(mm)
 Shrimp bend(mm)  Right angle bend(mm)
φ76 50及以下 50 & below 50及以下 50 & below
φ89 60及以下 60 & below 60及以下 60 & below
φ102 70及以下 70 & below 70及以下 70 & below
φ114 80及以下 80 & below 80及以下 80 & below
φ141 100及以下 100 & below 100及以下 100 & below
φ168 125及以下 125 & below 125及以下 125 & below
φ194 150及以下 150 & below 150及以下 150 & below
φ219 160及以下 160 & below 160及以下 160 & below
φ245 180及以下 180 & below 180及以下 180 & below
φ273 200及以下 200 & below 200及以下 200 & below

Such material can reduce the early-stage preparation working procedures, greatly save engineering time and can save 80% of labor and working hours, so it is a revolution for heat insulation engineering.

江苏福彩 江苏福彩 快乐时时彩 极速快三 快乐时时彩 快乐时时彩 江苏福彩 江苏福彩 江苏福彩 江苏福彩